| |
Self detection for DMX signal
Device can detect whether DMX signal is connected automatically, When there is no DMX signal or the console in not working, the laser light will shut down and the LED display panel will keep on flickering until the signal is connected. | Insulation principle, dust-proof design
There is a glass lens on light outlet window to protect and enhance transparent level. Motor base and front panel form a closed space which can enhance the dust-proof function. Reasonable design of structure inside to make sure laser head and lens out of the way of wind path. |
Wide angle scanning
The old scanning light reflects image by a piece of reflection mirror to fulfill wide angle. The weaknesses are dirt on mirror, low rate of reflection, slow scanning speed, distortion of reflection. CR-LASER solved this problem, made the X axle scan100°, injected new element to laser field. | Setting up SLAVE time delay
Generally, device is M/Slave at the same time, CR-LASER creative team, specially creates the delay of SLAVE movement, different position with different time delay which can make an amazing combination of wave style, over and under style etc. | Semi-closed loop scanning system
Stepping motor scanning system is a kind of open loop scanning way, it can’t inspect the motor running situation, once the motor is abnormal, light dot will appear. CR-LASER has designed a contrast detection way to test circuit which can get semi-closed loop control. When image output less than +/-1.5, the hardware chip will cut off power supply to avoid laser dot, dot will be closed automatically. |
|
.png)
.png)
.png)
